How to Turn on iPhone When Dead

If your iPhone is dead and won’t turn on, there are some things you can do to bring it back to life.

First, try recharging it. This will help determine if the problem is a battery issue or a hardware problem.

Battery

If you have a dead iPhone, the first step is to rule out any hardware issues that might be causing it to be unresponsive. These might include a faulty battery or logic board, for instance.

If the problem is software, however, there are several ways to revive a dead iPhone without resorting to hardware repairs. These methods include a soft reset and restoring the phone to factory defaults.

To perform a soft reset, you must connect your iPhone to a computer using a USB cable. Open iTunes or Finder, and click Restore iPhone.

Once you’ve restored your iPhone to its original settings, it should appear on the computer as normal. If it doesn’t, repeat the steps until you get it working again.

This process might take a while, so be patient!

You can also try turning on your iPhone’s battery-saving Low Power Mode. This mode can cut back on background processing, such as notifications and text messages, in order to conserve power. It’s useful for when you’re away from a power source, but it may not be enough to turn your iPhone on entirely again.

Depending on the type of iPhone you have, Low Power Mode can be activated by either pressing and holding the Power button for a few seconds or by tapping the toggle switch next to Low Power Mode in the main Battery section within Settings. You can also add a shortcut to the iOS Control Center that automatically turns on Low Power Mode when your iPhone’s battery reaches 80% or lower.

Software

A dead iPhone can be a frustrating experience. It may refuse to turn on, show no power, or respond when you press the power button. You may even be unable to charge it. Fortunately, there are several ways to get your phone back up and running.

One way is to try turning it on through iTunes. This will help you determine if there is a hardware or software issue that’s making it not work properly.

The first step is to connect your device to a computer and launch iTunes. Once it’s recognized, you can then update your operating system or restore a backup that you made to the device.

If this doesn’t work, you can also try hard resetting your iPhone. This will force your phone to restart and can fix a lot of operating system issues. However, it will also delete all data on your iPhone, so you should take a backup before trying this method.

Another solution is to use a third-party tool to recover your files. FoneLab iPhone Data Recovery is an excellent application that can scan your device and find all the files on it. It can recover photos, videos, messages, contacts and more.

You can download the app from the official website on your computer. The app will then scan the contents of your device and list them on its interface. Then you can select the items that you want to recover and click “Recover” to save them on your Mac.

Finally, if you’re still having problems with your dead iPhone, you might want to consider visiting an Apple store or an authorized service provider to see what options are available to you. These shops can replace your iPhone and get it working again.

Hardware

There are a number of reasons why your iPhone may appear dead or won’t turn on when it’s plugged in to a power source. The most common are a drained battery, software bugs, and hardware issues.

The most important thing to do if your iPhone is dead and won’t turn on when it’s charging is to determine the cause of the issue. You’ll want to start by ruling out a hardware problem, which could be something from a damaged logic board to a faulty battery.

If your device is still not turning on, perform a soft reset to see if this helps. The process involves holding down the “Sleep/Wake” button and the “Home” button simultaneously for 10 seconds. This should restart the device and allow it to boot into Apple’s logo mode.

However, if you’ve done the soft reset and your device is still dead, there may be other problems. The most likely reason for a completely dead iPhone is a hardware issue.

In this situation, you will need to bring it to an Apple Store or a local repair shop so that the Pros can check it out. If the Pros are able to identify the problem, they will be able to help you get your iPhone back up and running again.

Charging

If your iPhone won’t charge and you don’t know how to turn it on, there are a few simple things you can try. These steps will usually fix your problem, but if not, you can always take it to an Apple store or local repair shop.

When you plug in your phone to charge, you’re basically triggering a chemical reaction inside the battery. This is the same process that occurs when you charge your car’s battery, and it works in similar ways in the iPhone battery. For those of you who studied chemistry, charging is the transfer of electrons from the negative end of the battery to the positive.

But it’s important to remember that this process can cause damage, so you should only do it when your phone is completely dead. Otherwise, you could accidentally discharge the battery too much or overheat the electronics.

A common reason your iPhone won’t charge is because the port itself is dirty or clogged with debris. You can clean it with a toothpick and a bit of isopropyl alcohol. You can also try a different charger and cable to see if that helps.

Another possible cause of your iPhone won’t charge is a software issue. Luckily, most of these problems can be fixed by forcing the phone to restart.

First, try plugging in your iPhone with an alternative wall outlet. Occasionally, a breaker or light switch will cause an outlet to stop working without your knowledge. If you can’t find an alternate outlet, try using a different computer or external battery to keep your phone charged.

If that doesn’t work, try changing your iPhone’s adapter or cable. This is something that most people overlook, but it’s crucial to keeping your iPhone running.

Your iPhone’s Lightning port can become clogged with dirt and lint over time, especially if you often jam your phone in pockets or bags. To prevent this from happening, check your Lightning port for dirt or lint every so often and remove it if necessary.

If you have tried all of these steps and your iPhone won’t charge, it may be time to consider having the port replaced or your battery repaired. If you decide to go that route, a trusted Apple repair professional can do the job quickly and efficiently.